Blogs

Frozen Computer Screen:
Symptom:
The computer screen freezes, and the system reacts nothing at all.
Possible solutions: Hard reset: Press and hold the power button for a while until the computer shuts down completely; then turn on the computer again.
Check for hardware problems: A faulty RAM module or hard drive might also be responsible for freezing.
Run sfc in command prompt: Use the command prompt in order to check system files and repair them.
Paper Jam in Printer:
An issue where the paper is jammed in the printer and printing does not proceed.
Remedy:
Release the sheet of paper stuck in the printer without tearing it. Look for paper bits or other debris.
Make sure paper is duly aligned in the tray and not overstuffed. Fan the stack of papers to reduce static and dust.
WiFi Signal Weakness:
Reason:

Distance to Wall Routers. Obstructions like walls that separate devices, as well as interference from other devices, such as microwave ovens, are harmful.
Recommendations:
  • Move the router so it’s in a more central place.
  • Raise the router even off the ground.
  • Obstruct devices being kept between the router and devices.
  • Consider using a Wi-Fi range extender.
  • Get a more powerful router.
Misspelled Email Address:
Obstruction:

Generally, the email would not go through delivery because there might have been some typographical errors or incorrect format of the same email address.
Solution:
Review the stated email address of the given recipient carefully and correct any missed mistakes.
Mobile Phone Overheating: Problem:
Phones tend to overheat when they are being used diligently or under too much heat, or there are hardware issues present.
Solution:
Avoid direct sunlight. Close the applications that run in the background, remove case; check the battery if the phone continues to overheat.
No Audio Output in Television:
Failure:
No audible sound.
Fix:
Check on volume settings, no headphone or external speaker connected and audio settings for the television and connected devices.

Audio delay in Home Theatre:

  • Verification of HDMI Settings: Check HDMI setting as well for the receiver to check on the source devices.
  • Disabling Audio Delay Options: Some devices contain audio delay options should be put-off if not needed.
Scroll to Top